UF-30AB

Main specifications:
Maximum input power: 30KW
Oscillating frequency: 50-200kHz
Maximum input current: 45A
Heating current: 7-70A
Input voltage: 3phases 380VAC, 50 or 60Hz
Duty cycle: 100%
Cooling water: ≥ 0.2Mpa 5L/min
Auto heating time: 0.1-99.9seconds
Auto retaining time: 0.1-99.9seconds
Auto cooling time: 0.1-99.9seconds
Generator Weight: 32KG
Generator size: 580x260x500mm
Transformer weight: 25KG
Transformer size: 390x260x370mm
Packing weight: 81KG
Packing size: 680x620x600mm

Main characteristics:
1. with high frequency up to 200kHz, and very thin and tiny parts can be easily heated.
2. IGBT and current inverting technologies have been used; Higher reliability and lower maintenace cost.
3.100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install, installation can be done by unprofessional person very easily;
7. Light weight, small size;
8. Different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Main applications:
1. Heat treatment of gear and shaft
2. Steel and stainless steel screw coating
3. Annealing of wires and rods.
4. etc.