UF-10A -II

Main specifications:
Maximum input power: 10KW
Oscillating frequency: 200-500kHz
Maximum input current: 45A
Heating current: 10-45A
Input voltage: Single phases 220VAC, 50 or 60Hz
Duty cycle: 100%
Cooling water: ≥ 0.2Mpa 5L/min
Auto heating time: 0.1-99.9seconds
Auto retaining time: 0.1-99.9seconds
Auto cooling time: 0.1-99.9seconds
Weight: 30KG
Dimension: 580x260x500mm
Packing weight: 42KG
Packing size: 680x360x600mm

Main characteristics:
1. with high frequency up to 500kHz the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2. IGBT and current inverting technologies have been used; Higher reliability and lower maintenace cost.
3.100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install, installation can be done by unprofessional person very easily;
7. Light weight, small size;
8. Different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Main applications:
1. Heat treatment of gear and shaft.
2. Heating of wire smaller than 1mm
3. Floating melt for institute or college research and so on.
4. Surface quenching.